Product Introduction Of Slitting Machine

1: Introduction to the machine
The slitting machine is mainly used to slit large rolls into products of different widths, and can also check product quality. Its main features are as follows:
1. Photoelectric deviation correction during unwinding, high precision; control mode is divided into two gears: manual gear and automatic gear
2. There are two winding modes: surface winding and center winding;
3. Automatic tension control is used for winding and unwinding tension; control methods include tension feedback control and taper control.
4. Two slitting tools: circular knife shearing and air knife cutting, reliable quality, easy to adjust;
5. Adopt surface center winding, the winding quality is uniform and stable;
6. Automatic stop at fixed length, automatic length meter;
7. Equipped with trimming device, the edge material is discharged by the fan;
8. Suitable for slitting narrow strips (insulating materials, mica tapes, films, etc.) of various thin coils
II: Scope of application of the machine:
1. Applicable substrate: mica tape, paper, insulating materials and film slitting
2. Applicable industries: industries related to various insulating materials, special electrical paper, and films
3. Applicable processes: disc division, finished product inspection, finished product division, process cutting
III: Main technical parameters:
1. Machine speed (maximum): 150m/min
4. Maximum diameter of unwinding material Φ600-Φ1600
5. Maximum diameter of winding: Φ500-Φ1200
6. Minimum slitting width 6mm
7. Slitting accuracy ±0.1mm
8. Total power 10KW
9. Weight ~ 3500KG
The intelligence of the slitting machine is reflected in three aspects:
1. Intelligent process expert function
2. Intelligent operation expert function
3. After-sales service expert function.